Raven Envizio Pro

features:

* 3-D Last Pass guidance
* Integrated DGPS receiver, also available without receiver
* On-screen guidance can interface to a Raven RGL light bar
* Two product Raven CAN interface
o o Flow control – liquid, granular, NH3, direct injection
* Single product variable rate control (optional) Interface to Raven controller Wireless communication (optional) CANbus AutoBoom – Automatic Boom Height Control (optional)
o Full setup and control of the Raven PowerGlide Plus and UltraGlide AutoBoom systems can be performed from the Envizio PRO
* CANbus AccuBoom – Automatic Boom Section Control (optional)
o Setup and monitor boom section control, create no-spray-zones and boundaries from Envizio PRO
* Creates color coverage & as-applied rate maps on the go
* Creates field-boundary maps
* USB thumb drive memory transfer
* Data log information to internal memory
* Data saved in Shapefile format for use in most major software packages
* Simple product application report & map
* Select between English and Metric units
* Spinner rpm readout & control (optional)
* PWM Spinner control capable (optional)
* SmarTrax and QuickTrax assisted steering capable
* Supports standard, fast close, and PWM product control valves
* Boom Position Indicator – The width and relative position of the coverage booms are shown on the coverage map. This feature makes it easier to identify potential overlaps and helps in lining up a new swath.
* Guidance AB Lines – AB lines can be saved for each field and recalled at a later date.
* Tilt Sensor Setup – Setup of the Raven TM1 Tilt Sensor can be performed from the Envizio PRO.
* CAN Alarm Auto Clear – Off Rate and Low Limit CAN alarms now automatically clear from the Envizio PRO screen when the alarm condition is no longer present.
* Reset Field Totals – Field acreage and volume totals can now be reset while in a job.
* Simplified Setup including:
o Simplified Boom Setup – Simply enter the number of booms and boom widths and the Envizio PRO automatically calculates boom center locations. A simplified summary screen display boom setting and allows quick access to modify boom settings.

hardware specs:

* Display: 6.5” diagonal measure, 256 color, 480x640 resolution sunlight readable LCD
* Touch screen: 6.5” 5-wire resistive technology touch screen
* Operating System: Microsoft Windows CE
* Processor: 32-bit 800 Mhz Intel Celeron M processor
* Memory: 256 MB RAM, 512 MB internal storage
* Integrated DGPS sub-meter receiver, SBAS correction standard, e-Dif optional
* Available without internal DGPS receiver
* 4 USB data transfer ports
* Input/Output: 2 CANbus 2.0B, 3 serial RS232, Ethernet, DGPS output
* Enclosure: Engineered thermoplastic ABS/Polycarbonate blend with high impact and chemical resistance properties
* Voltage Range: 9V to 32VDC reverse polarity protected
* Temperature: -20C to +50C
* Dimensions: 8.4” W x 6.3” H X 3.3”D (213mm x 160mm x 84 mm)
* Weight: 3.5 lbs

Give us a call today for more information and pricing!